Ingredients |
Pure resin modified through high temperature curing, Linseed oil, Tung oil, vegetable driers and thinners. Does not contain petroleum based solvents. |
|
Coverage |
Approximately 20 square metres per litre per coat. |
|
Drying time |
Dust dry 2 hours, Hard 8 hours, Recoat after 24 hours or longer, no maximum time between coats. |
|
Application |
Brush, cloth, roller or spray (for spraying see FAQ page). |
|
Thinners |
Thinning not necessary for brush application of all coats, including the primer. Primer can be thinned with maximum of 10% white spirit for better penetration. |
|
Brush cleaner |
White spirit. |
|
Number of coats |
2 or 3 for indoors, 4 for outdoors, 5 for boats (minimum). Lightly sandpaper the surface between coats. More coats will give longer lasting protection. |
|
Aspect |
Bright glossy, add Gelomat to last coat for matt or satin finish. |
|
Odour |
Low, no respiratory irritants. Safe to use anywhere. |
|
Fire retard |
M2 classified. (not easily flammable). |
|
Dry extract |
60% +/- |
|
Specific gravity |
0.9 Viscosity approx 3 poises. |
|
Electrical resistance |
Very good. |
|
Storage life |
Unopened excellent. Opened several years if stored in container with no air. |
|
Special Features |
No brush marks, they disappear within 30 minutes of application. Ideal for interior or exterior woodwork. Excellent waterproofing. High resistance to temperature changes and weather conditions, including sea water environment. Good resistance to U.V. abrasion and knocks. Excellent covering power, easy to apply, brush marks flow out. High resistance to acids, alkalis, caustic soda, gasses etc. Withstands boiling water, hot plates and cups. |
|
Ingredients |
Linseed oil 40%, Synthetic resin (*long alkyd ester oil) 60%. |
|
Coverage |
Approximately 20 square metres per litre per coat. |
|
Drying time |
Dust dry 2 hours, Recoat after 6- |
|
Application |
Brush, roller or squeegee mop. |
|
Thinners |
Thinning not necessary for application of all coats. Can be thinned with white spirit for better penetration. |
|
Brush cleaner |
White spirit. |
|
Number of coats |
3 or 4 |
|
Aspect |
Semi glossy, add Gelomat to last coat for matt or satin finish. |
|
Odour |
Low, does not contain harmful products. |
|
Electrical resistance |
High. |
|
VOC content |
Max 400 g / l |
|
Special Features |
Hard wearing, resistant to abrasion and maintenance products. Good penetration, fast curing, anti- Odourless, colourless, does not contain harmful products. Resistant to UV, sea water. Easy to apply. After 2 or 3 layers lightly wet sand with 300 or 400 grit for a smooth finish, then apply final coat. To renovate the floor lightly wet sand the varnish, apply 2 layers. |