Click to enlarge
Sharpener mounted in drill with drill clamp.
Drill and clamp are not included in the pack.

Coarse stones adjacent to cone.                      Fine stones adjacent to cone
The stones can be changed so either the coarse or the fine stones are adjacent to the plastic cone.
A hex key for loosening the retaining ring is included.
Flexidisc sander
B & D Murkin
UK main importers for
Le Tonkinois varnish
Flexidisc sander
Unisharp knife and scissor sharpener
Easy to use sharpening tool fits in any electric drill.
The guide on the side of the tool gives the correct angle for sharpening scissors and garden shears.
Knives are sharpened between the spring loaded stones.
New version with coarse and fine stones.
Sharpener and hex key.

Always ensure the drill is clamped securely and wear safety glasses when using the sharpener.
The sharpener should be positioned so the upper surface revolves away from you.
(With normal direction of drill rotation the stones should be on your left as shown).
For initial sharpening of knives move the blade gently between the coarse brown stones.
For finishing or to re-sharpen use the finer grey stones.
Do not press down, use very light pressure only.
For scissors, garden shears or flymo blades place the blade against the side of the stones, using the cone as a guide to get the angle. Do not hold them at too steep an angle as they can cut into the cone, damaging it.
Stones are approximately 55mm diameter
The Unisharp is also available with the Uniclamp or as part of the professional pack.