Mini plate Standard plate
shown at the same scale
The 75 mm Mini plate replaces the 125 mm plate on the Flexidisc for sanding in confined areas.
Unscrew the black plastic nut on the Flexidisc, note it has a left hand thread so unscrews clockwise.
Push out the shaft and fit into the Mini plate.
When re-fitting the standard plate ensure the locating pip on the plate locates in the hole in the shaft.
Tighten the plastic nut securely.
The Standard pack page contains pictures of the unassembled Flexidisc and how to re-assemble.
Standard plate Mini plate
shown at the same scale